Supplier of semicustom and standard VLSI circuits and custom circuit card assemblies. Colorado Springs is a leader in RadHard digital logic solutions. They supply a broad range of standard products for avionics and space applications including FPGAs, LVDS, microcontrollers, MSI logic, memory, and serial communication interfaces for MIL-STD-1553 and 1773. This facility now offers several technologies to meet a variety of ASIC needs. Radiation-hardened CMOS technology can handle design complexities up to 3,000,000 usable gates and technologies down to 0.25µm. Circuit Card Assembly combines best commercial practices of the circuit card assembly with radiation-hardened integrated circuits to provide CCA solutions for the commercial space industry.

Aeroflex Colorado Springs also offers a broad range of products and capabilities for System-on-Chip applications. Our commercial mixed-signal ASICs are used in medical, industrial, security and intelligent sensors. ... Learn more

... Learn more

Facility produces gimbals, pedestals, motors, electronic drives, filters and intelligent controls, linear and rotary actuators and common module electro-optical scanning devices for the military and aerospace markets.... Learn more

Aeroflex Plainview manufactures advanced microelectronic multi-chip modules (MCMs) for airborne, space, shipboard, ground based and commercial avionics and telecom systems. Avionic products encompass 64 bit MIPs microprocessors, SRAM/FLASH memories, MIL-STD-1553/1760/1397 databus, and transceivers. Space application products include power modules, analog multiplexer modules, PWM chips, solid state relays and voltage regulators, DC-DC converters using Chip on Board technology for Mil and space applications. Single board computers for military applications using 64 bit MIPs based microprocessors. They also offer a variety of broadband, RF and Microwave amplifiers, Up/Down Converters, Log Amps, Switches, MIC Assemblies, and Filters for commercial, space and military applications. ... Learn more

... Learn more

Aeroflex, Burnham is an industry leader in wireless system test for 2G, 2.5G and 3G technologies, offering an extensive line of standard test sets for Base Station, Mobile and Cell Integrity Test, as well as Protocol Test Systems and Interference Analyzers - establishing itself as the leader in many areas of protocol conformance for the development of mobile phones, in particular for AMR, GPRS, EDGE and 2G/3G handover testing. Aeroflex leads the way in developing CDMA protocol test systems including 1xEV-DV. ... Learn more

Aeroflex, Cambridge creates testing solutions for 3G infrastructure developers and 3G network operators to assist them in debugging new network features, interoperability analysis, regression testing, network "stress" testing, acceptance testing, quality of service analysis and network performance optimization.... Learn more

... Learn more

Aeroflex Cupertino specializes in producing digital broadband test and measurement solutions that are critical to the roll-out of some of today's most promising and exciting wireless and satellite communication technologies. The company's data acquisition, playback and recording systems are fundamental tools used in the design, development and debug of a wide variety of advanced consumer communication and entertainment products. ... Learn more

Designs, develops, manufactures and sells test equipment for measuring and evaluating the quality of communication signals. Elancourt's instruments measure phase noise, timing jitter and other noise and distortion induced parameters for almost the entire communications spectrum.... Learn more

A preferred vendor to broadband equipment manufacturers, defense subcontractors, and major commercial telecommunications and wireless OEMs throughout the world, Aeroflex / Inmet offers a wide array of coaxial components in nearly every connector type, operating over frequency ranges of 7 kHz to 65 GHz, and with power handling capabilities to 300 Watts. The company's product offering includes coaxial fixed attenuators and terminations, bias tees, DC blocks, equalizers, and adapters. Inmet also focuses on the design and manufacture of specialized multi-component hybrids such as between series attenuators, combination DC block/attenuators or terminations and bias passing attenuators.

Aeroflex / Inmet is an ISO 9001:2000 certified supplier, located in a 24,000 square foot facility in Ann Arbor, Michigan. In December 2003, the Aeroflex Microelectronic Solutions Nanjing facility became part of Aeroflex / Inmet. This 16,000 square foot facility dedicated to providing sourcing and the low cost manufacturing of Aeroflex / Inmet products for sale within China and abroad, and is a subsidiary organized under Chinese law. ... Learn more

Offering components, subassemblies and subsystems that capitalize on a vast library of modular circuit designs from decades of manufacturing products for the RF and microwave industry, Aeroflex / KDI-Integrated Products is focused on providing standard and custom-designed products up to 40GHz into specialized system applications. Our products include PIN attenuators, phase shifters, vector modulators, PIN Diode switches, power combiners, dividers, and directional couplers, and detectors which can be offered alone or integrated to provide multiple functions within a modular RF subsystem. Examples include RF front ends, antenna switch matrices, digitally stepped Time Delay units, beamformer networks, high power low IMD combiner assemblies, and built-in base station diagnostic test, Up/Down converters and E911 enabling modules, to name only a few.

Aeroflex / KDI-Integrated Products' is an ISO9001:2000 certified supplier and is located in a 55,000 square foot facility is Whippany, New Jersey.... Learn more

Recent technological advances in materials and processes have enabled KDI Resistor Products to introduce environmentally safe aluminum nitride (AlN) resistors, terminations and attenuators designed as an alternative to similar components using Beryllium oxide (BEO) ceramic. Our product offering includes flange mounted 50 and 100 Ohm resistors and terminations with power handling to 800 watts CW, coaxial cable load assemblies, and attenuators in standard values of 1-10, and 20 dB. KDI Resistor Products also offers high power chip devices, terminating attenuators where low-level signal sampling is required, and drop-in pill type attenuators and terminations.

Aeroflex / KDI-Resistor Products is located in Whippany, New Jersey and is an ISO 9001:2000 certified supplier.... Learn more

Our strength is on state-of-the-art filters with very challenging technically requirements for space, defense and commercial applications. This includes filters offering exceptional performance in reject band attenuation, constant group delay, high stability in extreme environments, low passive intermodulation distortion components, and high power handling. Aeroflex / KDI offers designs up to 40 GHz, in a variety of filter and switched filter types including combline, cavity, ceramic cavity, waveguide and lumped elements. In addition, we offer switched filter modules with expertise in design topologies that provide wide frequency range performance, and low PIM distortion. Our expertise also encompasses designs that have no multipaction at very high power levels including space applications.

Aeroflex / KDI-Integrated Products' is an ISO9001:2000 and AN9001 certified supplier and is located in a 47,000 square foot facility is Hauppauge, L.I. New York.... Learn more

Among Aeroflex / Metelics' many areas of expertise, we have developed a unique process technology that has made it possible to achieve large volume production of the highest fco Schottkys and SRDs with some of the lowest transition times available to the industry. Our customer orientation of catering to special package, test and screening needs, combined with our state-of-the-art wafer fabrication facility, advanced process controls, and design expertise, is aligned to serve a wide range of market applications. Our process includes complete electrical, visual quality, and metelization inspection of wafers prior to release to production. Dies are then given a 100% DC test and visually inspected. In the production of devices or assemblies for packaged units, all units are 100% tested to ensure compliance to all required specification parameters.

Aeroflex / Metelics 21,000 square-foot facility in Sunnyvale, California, is certified to ISO 9001:2000 standards.... Learn more

Aeroflex Nanjing operations in China are concentrated in three areas that include product development and manufacturing for our North American and European customers with operations in China; product manufacturing for a growing list of domestic China-based OEMs; and to provide low-cost manufacturing of Aeroflex-produced designs for customers throughout the world. Aeroflex Nanjing supplies high power cable terminations, SMA terminations, splitters, dividers, couplers, attenuators,isolators/circulators and adapters.... Learn more

Designs and manufactures specialized electronic test equipment used in the commercial and military aviation industry and provides engineering, test and support systems for airborne equipment manufacturers, airframe manufacturers and airlines.... Learn more

World leader in the design, development and manufacture of wide band, fast switching signal generators and measurement systems. These include Frequency Synthesizers, electronic systems and subsystems. Facility produces wide band, fast switching frequency synthesizers, power dividers, multipliers and oscillators for the military, aerospace and aviation markets.... Learn more

Facility produces high speed test and measurement equipment for RF and microwave applications. These products are used in applications such as: Satellite Payload Testing, T/R Module Testing, Power Amplifier Testing, Radar Cross Section Measuring, and Antenna Pattern Testing.... Learn more

Facility provides a wide range of test instrumentation with considerable expertise in signal generators, signal analyzers, microwave, ATE, systems, wireless/radio test and other areas. Aeroflex continues to build an impressive portfolio of instruments and flexible test and measurement solutions. Wide-ranging support facilities ensure that customers have reliable, high integrity solutions to their testing requirements.... Learn more

Aeroflex / Weinschel's product offering includes fixed attenuators for test, metrology and space applications; continuously variable, manual step, solid-state digital step and programmable step attenuators; high power terminations; resistive splitters and dividers; manual phase shifters; Planar Blind-Mate®, Planar Crown® connectors. In addition to coaxial components covering DC-40 GHz, Weinschel offers a complete range of standard and custom-designed SmartStep® multi-path switching, combining, and attenuation subsystems for cable infrastructure and mobile wireless test applications, including RF simulation, multi-path and fading, high-power hot-switching attenuation, RF signal conditioning, RF and IF signal routing, and production testing.

Aeroflex / Weinschel's 35,000 square foot facility, located in Frederick, Maryland, is certified to ISO9001:2000 standards.... Learn more

Facility provides a wide range of test instrumentation with considerable expertise in wireless test solutions, public mobile radio, military radio, avionics and other areas. Aeroflex continues to build an impressive portfolio of instruments and flexible test and measurement solutions. Wide-ranging support facilities ensure that customers have reliable, high integrity solutions to their testing requirements.... Learn more